SYS-45035 needles
35-needle brine injector on the SYS-450 frame
- Injection needles
- 35
- Max stroke
- 120 mm
- Injection speed
- 60 times/min
Eighteen machines, specified one by one
Brine injectors, vacuum and pneumatic fillers, a double-tube twister, double clippers and frozen meat grinders. Every needle count, hopper size and power rating is its own model with its own page — no "series" page hiding three different machines behind one set of numbers.
Brine injectors · 9 models
Brine injectors: nine needle setups, one frame
SYS-450 with 35, 50 or 90 needles, SYS-480 with 84, 112, 148, 258 or 550 needles, and the wide-head SYS-168. Each needle count is its own machine and its own page — the head, not the frame, decides what your product can take.
SYS-45050 needles
50-needle brine injector on the SYS-450 frame
- Injection needles
- 50
- Max stroke
- 120 mm
- Injection speed
- 60 times/min
SYS-45090 needles
90-needle brine injector on the SYS-450 frame
- Injection needles
- 90
- Max stroke
- 120 mm
- Injection speed
- 60 times/min
SYS-48084 needles
84-needle brine injector on the SYS-480 frame
- Injection needles
- 84
- Max stroke
- 210 mm
- Injection speed
- 60 times/min
SYS-480112 needles
112-needle brine injector on the SYS-480 frame
- Injection needles
- 112
- Max stroke
- 210 mm
- Injection speed
- 60 times/min
SYS-480148 needles
148-needle brine injector on the SYS-480 frame
- Injection needles
- 148
- Max stroke
- 210 mm
- Injection speed
- 60 times/min
SYS-480258 needles
258-needle brine injector on the SYS-480 frame
- Injection needles
- 258
- Max stroke
- 210 mm
- Injection speed
- 60 times/min
SYS-480550 needles
550-needle brine injector on the SYS-480 frame
- Injection needles
- 550
- Max stroke
- 210 mm
- Injection speed
- 60 times/min
SYS-168168 needles
168-needle wide-head brine injector
- Injection needles
- 168
- Max stroke
- 210 mm
- Injection speed
- 10–56 times/min
Fillers & portioning · 4 models
Vacuum fillers and pneumatic portioning
ZG3000, ZG6000 and ZG9000 vane-cell vacuum fillers plus the SGI-III pneumatic filler — the same filling job at four capacities and two principles.
ZG30003,000 kg/h
Vane-cell vacuum filler, ±1 g at 3,000 kg/h
- Capacity
- 3,000 kg/h
- Portion accuracy
- ±1 g
- Hopper
- 245 L
ZG60006,000 kg/h
Vane-cell vacuum filler, 6,000 kg/h
- Capacity
- 6,000 kg/h
- Portion accuracy
- ±5 g
- Hopper
- 245 L
ZG90009,000 kg/h
Vane-cell vacuum filler, 9,000 kg/h
- Capacity
- 9,000 kg/h
- Portion accuracy
- ±4 g
- Hopper
- 275 L
SGI-IIIPneumatic
Pneumatic filler, 80 portions a minute
- Output
- 80 portions/min
- Portion range
- 50–1000 g
- Hopper
- 57 L
High-speed twisters · 1 model
Double-tube twisting at 1,800 sets a minute
SGGN-II works two filling tubes alternately with full servo drive, so the casing is loaded while the other tube twists.
SGGN-IIDouble tube
Double-tube twister, 1,800 sets a minute
- Production speed
- 1,800 sets/min
- Twist length
- 10–600 mm
- Casing diameter
- 10–50 mm
Sausage double clippers · 2 models
Double clippers that hold the seal
DKJC-120 for 35–120 mm casing and DKJC-200 for 80–200 mm casing, both 100 clips a minute on aluminium wire.
DKJC-12035–120 mm casing
Double clipper for casing up to 120 mm
- Casing range
- 35–120 mm
- Clip size
- 12–15 mm
- Clipping speed
- 100 / min
DKJC-20080–200 mm casing
Double clipper for casing up to 200 mm
- Casing range
- 80–200 mm
- Clip size
- 15–18 mm
- Clipping speed
- 100 / min
Frozen meat grinders · 2 models
Frozen meat grinders: two builds, 1,000 kg/h
JRD-120-1 with a 5.5 kW drive and JRD-120-2 with 7.5 kW — same 1,000 kg/h throughput, different motor for colder block and finer plates.
JRD-120-15.5 kW
Frozen meat grinder, 5.5 kW
- Capacity
- 1,000 kg/h
- Power
- 5.5 kW
- Plate holes
- φ3–φ26 mm
JRD-120-27.5 kW
Frozen meat grinder, 7.5 kW
- Capacity
- 1,000 kg/h
- Power
- 7.5 kW
- Plate holes
- φ3–φ26 mm
Selection help
Not sure which model fits?
Send four numbers: product, casing or needle requirement, kilos per hour, supply voltage. We size it — and say so if the smaller model is enough.
Tell us what you need to run.
Share your product, casing size and hourly output — we will come back with a machine configuration, a price and a delivery date. No obligation.